Analysis of motorcycle chain and sprocket replacement

Motorcycle chains.SprocketsFirst of all, the chain and sprocket must be replaced at the same time, because they are in the same working condition, only together to replace their clearance to ensure normal, otherwise the single replacement will shorten the service life.

Secondly, their abrasion resistance and tensile strength must be consistent, otherwise they will accelerate the wear and tear, and the best way to ensure these two consistent is to replace the set chain, the manufacturing process and anti-wear performance of the set chain will be better than that of, with the chain and sprocket.

In addition, the whole replacement process of installation and adjustment must be reasonable, if the installation and adjustment do not meet the regulations, the best set of chains will not last long, and the chain and sprockets need to be maintained regularly at a later stage.

Chain.SprocketsThe whole installation process is worth noting that the size of the sprocket should be as much as possible to ensure that it is the same size as the original, but if there is a performance demand, it can also be adjusted by changing the size of the sprocket, usually the front small and rear large climbing ability will be stronger, while the front large and rear small top speed will be higher, so the vehicle performance can be adjusted by this feature.