Cycloidal ReducerGearbox is a large and widely used and the most widespread basic components, widely exist in machinery, metallurgy, petroleum, construction, hydraulic and cement, transportation and other industrial areas of various equipment, the scale of use is very wide, but also in the protection of equipment disassembly and protection is more messy, misuse of more time and more messy parts.
According to the detection method to divideCycloidal ReducerThere are several approaches to gearbox troubleshooting:
a. The oscillation detection and diagnosis method uses machine oscillation as the information source to distinguish the operating condition of the machine by the variable ratio characteristics of the oscillation parameters during the operation of the machine.
b. Noise detection and diagnosis method to machine operation noise as a source of information, in the process of machine operation, through the change of noise parameters to distinguish the operating conditions of the machine. The essence of this method is common with the oscillation detection and diagnosis method, because the noise is primarily generated by the oscillation. Although this method is simple, but vulnerable to environmental noise, not as accurate as the oscillation detection and diagnosis method.
c. The temperature detection and diagnosis method uses the temperature of observable mechanical parts as a source of information inCycloidal ReducerDuring the operation of the gearbox, the operating condition of the machine is distinguished by the change in temperature parameters.
d. Acoustic emission detection and diagnosis method metal parts in the process of wear, deformation, cracking occurs in the elastic wave, the elastic wave as a source of information, in the process of machine operation, analysis of the frequency change characteristics of the elastic wave to distinguish the machine's operating conditions.