Cycloid reducer can be widely used in petroleum, environmental protection, chemical industry, cement, conveying, textile, pharmaceutical, food, printing, lifting, mining, metallurgy, construction, power generation and other industries, as a driving or decelerating device, which is divided into horizontal, vertical, biaxial and direct-connection type assembly methods. Then what conditions need to be noted when using it?
Conditions of use
1. The cycloid reducer is allowed to be used in continuous working system, and it is allowed to be operated in both forward and reverse directions at the same time. Some models of cycloid reducers are allowed to rotate in one direction only.
2, the input shaft speed is rated at 1500 rpm, and it is recommended to use a 6-pole motor with 960 rpm when the input power is greater than 18.5 kW.
3. The working positions of the horizontal mounted cycloid reducer are all horizontal. The maximum horizontal inclination angle during installation is generally less than 15°. If it exceeds 15°, other measures should be adopted to ensure sufficient lubrication and prevent oil leakage.
The output shaft of the cycloid reducer cannot be subjected to large axial and radial forces, and other measures must be taken when there are large axial and radial forces.