A car needs gasoline to run, and so does a cycloid reducer, which needs oil to run. Every time you use a speed reducer, the oil will play a big role. Different cycloid reducers use different oils, and the oils used in different temperatures are also different. So how do we utilize the oil to run the reducer well?
1. Vertical installation of planetary cycloid reducer should prevent oil pump oil breakage to avoid damage to the components of the cycloid reducer.
2. When refueling, you can turn on the upper part of the air cap to refuel. The oil can be discharged by turning the oil drain plug at the lower part of the seat. There is no lubricating oil inside the cycloid reducer when it is shipped from the factory.
3. Newly issued cycloid reducers have been lubricated with grease and replaced every six months.
4. Horizontal cycloid reducer adopts oil pool lubrication under normal condition, and the oil level can be kept in the middle of the sight oil window, and circulating lubrication can be adopted when the working condition is bad and the ambient temperature is high.
5. The first refueling operation 100 hours should be replaced with new oil, and the internal dirty oil flushed clean before continuous work, every six months to replace the 8-hour working system, if the working conditions are poor can be appropriate to shorten the time of oil change, it has been proved that the reducer's frequent cleaning and oil change to extend the service life of the reducer has an important role. In the process of use should be frequently supplemented lubricating oil.
6. reducer at room temperature is generally used 40# or 50# mechanical oil lubrication, in order to improve the performance of the reducer, extend the service life, it is recommended to use 70# or 90# Extreme Pressure Gear Oil, in the high and low temperatures can also be reconsideration of lubricating oil when the work should be done.
In summary, it can be analyzed that oil plays a very significant role in the operation of the entire cycloid reducer. In the normal temperature, the use of oil can fully provide the performance of the cycloid reducer. When working and using the cycloid reducer for a long time, it can effectively protect the reducer and prolong its service life.