Performance and features of ABR series right-angle fine planetary cycloid gear reducer:
1、The transmission interface of planetary cycloid reducer adopts full-needle needle roller bearings without adhering device, which increases the touching area to improve the rigidity of layout and output torque;
2, the choice of 3D / PORE depiction analysis skills, respectively, on the helical tooth surface for tooth shape and the guide to repair, in order to reduce the gear to meshing and meshing out of the impact and noise, to increase the use of the gear system life;
3, gear material selection of high-grade chromium-molybdenum-vanadium alloy steel, tempered thermal disposal to the base material hardness of 30HRC, and then use the factory's leading ion nitriding equipment will be the hardness of the gear appearance of nitriding to 840HV, in order to obtain the best wear resistance and impact resistance and toughness;
4, cycloid reducer planetary armature and output shaft choose one-piece layout depiction, and the output shaft bearing equipment choose large span depiction to ensure maximum change rigidity and output load capacity;
5, the output end of the oil seal touch interface selection of leading titanium nitride (TiN) coating, the appearance of the hardness of 2000HV or more, and touch the surface of the appearance of the roughness of Ra 0.2um below, to ensure the lowest coefficient of friction and the lowest starting torque;
6, the use of NYOGEL792D composed of lubricating grease, and the use of IP65 protection level sealing depiction, lubricant does not leak, free of protection;
7、The connection between the input end of the cycloid reducer and the motor adopts the cylinder clamp type locking organization and undergoes dynamic balance analysis to ensure the concentricity of the interface and the transmission of power with zero backlash under high input speed;
8. The whole gear bar material produces a sun gear with strong rigidity and precise concentricity;
9. Common modularized depiction of motor articulation plate and bushings for any servo motor;
10, gear box appearance using electroless nickel disposal, motor articulation plate selection of black anode disposal, progress of environmental tolerance and corrosion resistance;
11、Gear box and inner ring gear choose one-piece depiction, compact layout, high fineness, high output torque.